Warmwire Heated Floor Jun 02, 2016

I installed a WarmWire heated floor in a 6'x8' coat room that had no other source of heat. It is on a concrete slab with 2 outside walls and a wall to an unheated attached garage. I glued 2 6mm thick sheets of Cerazorb synthetic cork directly on the concrete. It was super easy to lay the wire on top on the cork using the metal clip system provided. To be safe, I laid a sheet of 1/4" luan plywood on top of the wires while laying the tile. I checked the resistance in the wires at each step... more

Nice Choice Sep 18, 2016

The radiators went together very easily with the connections provided to the heating pex and there were no leaks. very easy to bleed. they provide much more heat than I was getting from my old wall convectors and seem to retain the heat a long time after the boiler is off. Not hard to hang either as long as you separate the hanger prongs in increments of 1/2 inch. Also, my wife was pleasantly surprised by the appearance

Kerdi Shower Kit Sep 23, 2016

I have used these before on a 2nd floor. Really was looking for something to put tile on rather than a mortar base. These are great, east to cut, easy to put down fabric and then tile using unmodified thinset. It's been several years and still looks good, water drains well.

Fgc 6xl, 483 Cfm Aug 15, 2016

One fan, and A coil is not freezing up has run from 6 am till now -- 7:30pm at 93 degrees outside temp---- other two should be coming to their new home soon

Nice Choice Oct 18, 2016

The radiators went together very easily with the connections provided to the heating pex and there were no leaks. very easy to bleed. they provide much more heat than I was getting from my old wall convectors and seem to retain the heat a long time after the boiler is off. Not hard to hang either as long as you separate the hanger prongs in increments of 1/2 inch. Also, my wife was pleasantly surprised by the appearance